PSH 1z, 2z, 3z, 4z

  • Fast actuator tip-tilt motion in 3 Axes
  • Supports mirrors and other components
  • Tilting angle of 1 to 4 mrad
  • 2700 to 5800 Hz resonant frequency
  • Sub-µrad resolution
  • Feedback sensors available
Add to quotation

Description

The PSH 1z, PSH 2z, PSH 3z and the PSH 4z mirror tilting systems each consist of two active piezo electric actuators. These actuators provide tilt to the top plate on up to 3 axes. By using all actuators together the top plate exhibits a piston movement up to 8 µm. Two of the axes are perpendicular to each other.

Their construction is temperature compensated so that changes in environmental temperature do not affect the tilting angle. The tilting mirror mounts are pre-loaded, thus they are well suited for dynamic applications. One of their main advantages is a high resonant frequency – which is why these systems can provide sub-msec response time.

Closed-loop versions with integrated positioning control are available for high positioning linearity and repeatability. Non-magnetic material and other customer size requirements are available upon request. The series is designed for mirrors and optical components up to 50 mm in diameter.

For mounting of other components on the top plate, thread and pin holes are available. A special mounting clamp can be provided for these systems to avoid torque forces between the housing and top plate when mounting the mirror or other components.

Technical Data

Top PlateUNITPSH 1zPSH 2zPSH 3zPSH 4z
Part #Type A, 1″K-201-10K-202-10K-203-10K-204-10
Type B, 1.5″K-201-20K-202-20K-203-20K-204-20
AxesX, Y, ZX, Y, ZX, Y, ZX, Y, Z
Tilting Range Open Loop (±10%)*mrad1234
Resolution**µrad0.0020.0040.0060.008
Dimensionsmm25 x 25 x 2425 x 25 x 3325 x 25 x 4225 x 25 x 51
Weightg48586883
*Typical value measured with NV 40/3 controller. **The resolution is only limited by the noise of the power amplifier and metrology.

Related Products

PSH 4

show more

PSH 5/2

show more

NV200/D Net Compact Amplifier

show more

NV40/3

show more