- 100 µm focusing range
- Compact design
- High resonant frequency
- Easy to attach on microscopes
- Flexible use by Flex-Adapter
- Optional feedback sensor
The objective lens positioning system MIPOS 100 was developed for finely adjusting micro objectives and object lenses. The maximum motion is 100µm. The resolution of MIPOS 100 is very high and, in practice, only limited by the voltage noise of the power supply.
All standard threads for Zeiss, Leica, Nikon, Olympus etc. are available for the top and bottom sides of the MIPOS 100.
Mounting this system onto the microscope is very easy – screw the Flex-Adapter thread ring into the microscope and mount the lens positioning system on this ring with a screw. Because of the small size, no other threads beside the MIPOS are blocked.
A special version enables to work in an upside down (UD) position on inverted microscopes. These MIPOS systems are designated by “UD”. To avoid drift and hysteresis, the MIPOS is also available with an integrated strain gauge measurement system (“SG”). “PL” versions are pre-loaded.
|MIPOS Series||UNIT||MIPOS 100||MIPOS 100 UD||MIPOS 100 SG||MIPOS 100 SG UD||MIPOS 100 PL||MIPOS 100 PL SG||MIPOS 100 PL CAP|
|part # for thread||M25x0.75||–||O-303-00||O-313-00||O-303-01||O-303-01||O-323-00||O-323-01||O-323-06|
|Motion in Open Loop (±10%)*||µm||100||100||100||100||140||140||140|
|Motion in Closed Loop (±0,2%)*||µm||–||–||80||80||100||100||100|
|Resolution Open Loop**||nm||0.2||0.2||0.2||0.2||0.3||0.3||0.3|
|Resolution Closed Loop**||nm||–||–||2||2||–||4||1|
|Dimensions (L x W x H)||mm||48 x 40 x 16.5||48 x 40 x 16.5||48 x 40 x 16.5||48 x 40 x 16.5||60.7 x 50 x 23.5||60.5 x 50 x 35.3||60.2 x 50 x 34.5|