24DV40 Digital Piezo Controller
Characteristics 24DV40 Digital Piezo Controller:
- compact digital piezo controller
- Resolution 16 bit
- Closed loop control with PID controller
- For all kinds of d-type actuators
- Low Pass Filter and Slew Rate Limiter
Digital Piezo Controller - digital piezo controller
The 24DV40 digital piezo controller from piezosystem jena is designed to be used as a single unit for quasi static or dynamic step positioning applications in laboratory set-tings.
For the operation of the actuator a control voltage of -20 V to +130 V and an output current of 40 mA (2 x 40 mA for NanoX® actuators) are supplied.
Connected actuators are controlled via PC using the integrated USB 2.0 interface. With a 16-bit resolution, the 24DV40 guarantees high positioning accuracy and low noise.
As usual for digital piezo controllers of piezosystem jena, actuators with D-Sub plugs are easy to connect. Due to the stored information in the EEPROM, the actuator is being automatically recognized. The 24DV40 can be used with actuators equipped with either strain gauge (SG) or capacitive sensors (CAP), as well as with actuators without measurement system. The 24DV40 also supports actuators based on piezosystem jena’s own NanoX® technology.
The 24DV40 has an automatic sensor identification (ASI function) and automatic system calibration (ASC function). All values of the actuating system, like serial number of the actuator, actuator name, control parame-ters and filter settings, are stored in the actuator plug. This allows an easy exchange of actuators or controllers.
A digital PID controller is integrated in the controller. The user can change the values according to his current setup himself. A low-pass filter and a slew rate limiter are also very useful features for numerous applications.