Piezo Controller 1 Channel Version

Piezosystem Jena offers a wide range of 1-channel piezo controllers for applications in laboratories, industrial applications, and for development tasks.

The piezo controller offerd by piezosystem jena is designed for high precision positioning of low-voltage piezo elements. The control units are tuned for extremely high output stability and extremely low signal noise at the output. The value of signal-to-noise ratio, which is important because it determines the total resolution of the actuator, is 0.3 mV for most of the amplifiers. Thus, the nearly unlimited resolution of piezoelectric actuators from Piezosystem Jena is implemented as an ultra-precise movement.

Depending on the configuration, the piezo controller can be equipped with a sensor servo module for controlling actuators with an integrated positioning feedback sensor. These actuators are marked by the letters "SG" or "CAP" or "CLE" in the description. The piezo controller 30DV50, 30DV300, 30V300, and 12V40 amplifier series modules are made for OEM industrial applications and have appropriate casings.

All amplifiers can be controlled by an analog signal. Additionally, all systems can be operated manually or via a digital interface, with the exception of a few controllers in OEM versions.

Please contact us or our representatives in your region for further information: sales(at)piezojena.com


Piezo Controller V 40/1CLE

  • Channels: 1 analog
  • Output current: 40 mA
  • Output signal: -10 ... 150 V
  • Interface: RS232 (9-pin D-Sub)
  • Piezo connector: LEMO 0S.302
  • for 1-axis systems

 

 

Piezo Controller NV 120/1

  • Analog; Output current: 120 mA;
  • Sensor Controller
  • USB, RS232; Piezo-Connector Sub-D15
  • Equipment for Laboratory

 

 

OEM Piezo Controller nano box

  • Analog; output current: 8 mA;
  • Main supply: 5 V DC
  • Built in frequency generator
  • low cost application

 

 

nano box USB

  • Digital; Output current: 10 mA
  • Sensor Controller
  • USB-Interface
  • Low dynamic applications

 

 

12V40 OEM-Version

  • Analog; output current: 40 mA
  • Main supply: 12 V or 24 V DC
  • Sensor controller version
  • Monitor/modulation input
  • Industrial version

 

 

Piezo Controller 30V300

  • Analog; output current: 300 mA
  • Main supply: 10 ... 30 V DC
  • Sensor controller integrated
  • Monitor/modulation input
  • Industrial version

 

 

Digital Controller 30DV50

  • Digital; output current: 50 mA
  • Main supply: 10 V ... 30 V DC
  • RS 323; Sensor Controller
  • Research & Development

 

 

Digital OEM Controller 30DV300

  • Digital; output current: 50 mA
  • Main supply: 10V ... 30 V DC
  • RS 323; Sensor Controller
  • Research & Development

 

 

+1 (508) 634-6688U.S. Office

+49 (3641)-6688 0German Office

Please contact our technical staff for further assistance. Together with you we will find a solution for your needs.

e-mail address: info@piezojena.com

contact sheet

We will get in touch with you as soon as possible.

partners worldwide