30DV50 Digital OEM Controller
Characteristics 30DV50 digital OEM Controller:
- 1 channel digital piezo controller
- Resolution 20 bit
- Supply voltage from 10 to 30 V DC
- 64 MHz processor
- 20 µs sampling closed loop
- Auto calibration and ASI-Function
- For all kinds of closed loop sensors
- Built-in wave function generator
- Fully programmable
Compatible Software Packages
Digital Piezo Controller - 30DV50 OEM
The line of digital piezo amplifiers (d-Drive) by Piezosystem Jena is now expanded by the OEM amplifier module 30DV50. The 30DV50 was designed for universal use with a main supply voltage from 10 V to 30 V DC. The casing is available as a screw slot version (see picture) or for use in a 19" rack mount casing.
The high performance of the 30DV50 with 20 bit resolution guarantees the customer high speed positioning with the highest accuracy available. It includes rise time optimization and active oscillation damping for each special application.
The 30DV50 comes with an auto calibration routine and automatic sensor identification ASI-Function. All values of the actuating system, like capacitance, measurement system, resonant frequency and motion, are automatically stored in the amplifier. Automatic amplifier optimization occurs after actuator identification.
A unique feature of the 30DV50 is that it can be used in combination with strain gauge or capacitive feedback sensors without additional modification. The DSP (digital signal processor) runs at 64 MHz. The sampling rate is only 20 µsec.
You need a higher current?
The controller 30DV300 has an output current of up to 300 mA.