Z-axis nano positioner PZ 16

characteristics:

  • z-axis elevator stage
  • motion up to 16 microns
  • stage design with top/bottom plate
  • nanometer resolution
  • easy adjustment
  • for dynamic applications
  • high resonant frequency
  • vacuum compatible
  • combinable with other piezo systems

 

application examples:

  • fiber positioning
  • laser optics
  • scanning systems
  • micromanipulation


Due to the nature of the solid state flexure and parallelogram construction, the z-axis nano positioner PZ 16 can travel without any mechanical play. The PZ 16 piezo elevator stage provides a much higher resolution than is possible with mechanical or electromechanical systems.

Based on the flexure guidance system, the actuator is mechanical pre-loaded. Thus enables the piezo stage to work dynamic. This can be done also with small loads adapted onto the top plate.

The piezo element PZ 16 is equipped with a capacitive measurement system that compensates drift and hysteresis and guarantees sub-nanometer accuracy during positioning.

 

Z-axis piezo stage PZ 16

PZ 16 z-axis elevator stage

Recommended Piezo Controller

  • 3-channel controller
  • NV 40/3: for actuators without feedback sensors
  • NV 40/3CLE: for actuators with integrated feedback sensors
  • output current 40 mA per channel permanent
  • signal noise <0.3 mV @ 500 Hz
  • manual control, USB interface

+1 (508) 634-6688U.S. Office

+49 (3641)-6688 0German Office

Please contact our technical staff for further assistance. Together with you we will find a solution for your needs.

e-mail address: info@piezojena.com

schnellkontakten

contact sheet

We will get in touch with you as soon as possible.

partners worldwide