Piezo focus fine adjustment with the MIPOS 250

Characteristics:

  • 250 µm adjustment range
  • Easy to fix onto microscopes by Flex-Adapter
  • Very compact design
  • Parallelogram construction
  • High resonant frequency
  • For micro objectives up to 300 g mass / up to 40 mm diameter
  • Option: positioning feedback system
  • Can be used for either upright or inverted microscopy


The piezo focus positioner MIPOS 250 was developed for finely adjusting micro objectives and object lenses. The maximum motion is 250 µm. The resolution of the MIPOS 250 is very high and, in practice, only limited by the voltage noise of the power supply.


A special integrated preload design results in the following advantages:

  • Very small angular deviation
  • Highly parallel large range of motion
  • High resonant frequency


All kinds of standard threads for Zeiss, Leica, Nikon, Olympus etc. are available for the top and bottom sides of the MIPOS system. Mounting this system onto the microscope is very easy - screw the Flex-Adapter thread ring into the microscope and mount the MIPOS 250 for piezo focus fine adjustment on this ring with a screw. Because of the small size, no other threads beside the MIPOS are blocked.

To avoid drift and hysteresis, there is the option of equipping the MIPOS with an integrated strain gauge measurement system "SG".

MIPOS 250

+1 (508) 634-6688U.S. Office

+49 (3641)-6688 0German Office

Please contact our technical staff for further assistance. Together with you we will find a solution for your needs.

e-mail address: info@piezojena.com

contact sheet

We will get in touch with you as soon as possible.

partners worldwide