# 40mA Multi Channel Amplifiers

- Veröffentlicht: 2022-04-29
- Aktualisiert: 2026-09-30
- Autor: Randy Hilgren
- Quelle: https://www.piezosystem.com/products/amplifiers/multi-channel/40ma-multi-channel-amplifiers/

---

## Control Multiple Actuators with One Controller

For the precise nanometer movement of actuators and other piezo products, an amplifier is required. Multi-channel amplifiers allow you to control multiple actuators or piezo products with a single amplifier. The NV40/3 piezo amplifier was designed for controlling low voltage piezo elements. It includes a voltage amplifier, a display and a PC-interface. The high-resolution display shows the voltage of the actuator, along with the mode of operation and the temperature inside the amplifier.

This amplifier also provides the opportunity to control the piezo element via analog modulation input or RS232. The actuator voltage can be viewed via the monitor output.

Due to the very low voltage noise of the output current, only 0.3 mV rms, the amplifier is ideally suited for positioning applications with sub-nm resolution. Special protective circuits prevent voltage spikes when switching the unit on and off and consequently avert any overload caused by overheating or short-circuiting. This soft-start ensures an actuator-safe activation of the system.

Due to its design and compact casing, the amplifier is recommendable for R&D and engineering applications.

![Back panel of NV 40/3 Piezo Multi-channel Amplifier](https://www.piezosystem.com/wp-content/uploads/2022/04/NV-30-3-BACK-Family-Page-Inset.jpg)

NV 40/3 Back Panel Pictured

### Applications:

Typical configurations in university and industry settings:  Laboratory applications, high resolution positioning, short rise time of low voltage actuators, and in wide variety industrial applications.

### System Specifics:

Dimmable TFT display

40 mA permanent output current per channel

Low noise output signal

USB 2.0 and RS232 interface

Analog input and output signals

Position control for strain gauge and capacitance sensors (CLE version)

![The image of NV40/3 piezo analog controller with its display and control buttons. This NV40/3 analog amplifier works in three channels.](https://www.piezosystem.com/wp-content/uploads/2022/04/NV40-3-680x525.jpg)

#### NV40/3

[show more](https://www.piezosystem.com/product/nv40-3/)

## Downloads

- [![](https://www.piezosystem.com/wp-content/themes/wptheme/assets/img/ico-download.svg) NV40-3-Datasheet.pdf (733 KB)](https://www.piezosystem.com/wp-content/uploads/2022/04/NV40-3-Datasheet.pdf)
- [![](https://www.piezosystem.com/wp-content/themes/wptheme/assets/img/ico-download.svg) NV40-3-Instruction-Manual.pdf (2 MB)](https://www.piezosystem.com/wp-content/uploads/2022/04/NV40-3-Instruction-Manual.pdf)
- [![](https://www.piezosystem.com/wp-content/themes/wptheme/assets/img/ico-url.png) NV 40/3 and NV 40/3 CLE C# Library](https://github.com/piezosystemjena/psj-lib-cs)
- [![](https://www.piezosystem.com/wp-content/themes/wptheme/assets/img/ico-url.png) NV 40/3 and NV 40/3 CLE C# Documentation](https://piezosystemjena.github.io/psj-lib-cs)
- [![](https://www.piezosystem.com/wp-content/themes/wptheme/assets/img/ico-url.png) NV40/3 CLE Python Library](https://github.com/piezosystemjena/psj-lib)
- [![](https://www.piezosystem.com/wp-content/themes/wptheme/assets/img/ico-url.png) NV 40/3 CLE Python Documentation](https://piezosystemjena.github.io/psj-lib/)
