high frequencies in closed loop mode

Can actuators equipped with strain gauges be operated with high frequencies in closed loop mode?

No, the highest frequency actuators with strain gauges can reach is around 30 Hz.
The bandwidth of the sensor pre-amplifier is 5 kHz, nevertheless the control electronics still need time to process the signals and to correct the actuator´s position.
A frequency of about 100 Hz can be reached by optimizing several parameters of the control electronics. This is done by piezosystem jena within the context of a special calibration.

+1 (508) 634-6688U.S. Office

+49 (3641)-6688 0German Office

Please contact our technical staff for further assistance. Together with you we will find a solution for your needs.

e-mail address: info@piezojena.com


contact sheet
By submitting I confirm the privacy notices in particular according to Art. 13 GDPR.
* This field must be filled!

We will get in touch with you as soon as possible.

partners worldwide