Motion Systems
FB Series Linear Stages
FB Series Linear Stages
- modular linear stages
- combinable to multi-axes systems
- optical encoder
- crossed roller bearings
- different models depending on force and velocity requirements
- variable encoder resolution
Models:
- FB050
- FB100
- FB075
- FB150
- FGB (Goniometer version of FB series)
FBR Series Rotary Stages
FBR Series Rotary Stages
- Rotary stages
- crossed roller bearings
- contact free high resolution encoder
- 60 mm diameter ring
- HR2 motors (depending on requirements, one ore more motors)
- standard, vacuum and UHV versions
- Max. rotational velocity 360 deg/sec
- Min. rotational velocity 0.002 deg/sec
- standard resolution 5 arc/sec
- optional resolution 0.5 arc/sec
- position accuracy 10 arc/sec
- Runout 5 µm
- optional Runout 2.5 µm
- rotational flatness 5 µm
- optional flatness 2.5 µm
- loads up to 5 Kg
more on Motion Systems
FBZ Series Vertical Stages
FBZ Series Vertical Stages
- vertical positioner
- horizontally moving wedge-axes
- linear guiding mechanism to avoid deviation in motion
- optical linear encoder for Z position
- Sub-micron precision
more on Motion Systems
Nanomotion Motors
EDGE Series
EDGE Series
- max. velocity (withou load) 120 mm/sec
- dynamic Sstall force 300 mN
- static holding force: 300 to 320 mN
- static stiffness 0.06 to 0.09 N/µ
- Vorspannung: 1.65 to 2.0 N
- Kf constant force 30.5 mN/VoH Kommando mit AB5 Driver; 40.6mN/VoH Kommando mit AB1 Driver
- Kv force -1.6307 Nsec/m
- Offset: 2-3 V of 10 (depending on controller)
- resolution 1 µ
more on EDGE motors
Optronic Modules
Linear NUS Shutter S787
Linear NUC Shutter S787
- direct drive via EDGE motor
- small weight
- velocity 15 mm in 100 microseconds
- 17x15 mm Shutter Blade
Rotation NUC Shutter RS08
Rotations NUC Shutter RS08
- rotation shutter
- dimensionen 8x20 mm, incl. electronic
- 3.3 v battery operation possible
- travel 35° to 120°
- different shutter blades compatible (up to 25 mm diameter)
- Feedback system for closed loop
Data sheet
ER-15 Rotation motor
ER-15 Rotary Piezo Motor
- rotation motor
- focus/zoom module
- shutter and filter control
- Pan and Tilt Modules
- silent operation
- breaking without power consumption
- different external and integrated controllers available
Data sheet
Drive Strips
Drive Strips
Drive Strips
Standard Ceramics
- CS-X-XX-XXX (X = width, XX = height, XXX = length)
- CS-10-1.5-200 for ST und HR1 motors
- CS-10-3-XXX (XXX up to 350 mm): for HR1, HR2 and HR4 motors
- CS-20-3-XXX (XXX up to 350 mm): for HR8 motors
DuraStrips
- DS-10-3-XXX (XXX up to 350 mm): for DM1, DM2 and DM4 motors
- DS-20-3-XXX (XXX up to 350 mm): for DM8 motors
- CCS (Ceramic Coated Steel) CCS-20-3-XXX (XXX up to 2000 mm): for HR1, HR2, HR4 and HR8 motors
Controller
AB Series
AB Series
- 1-channel
- +/-10v analogue input (all models)
- SPI interface
- configurations for input 12 v, 24 v and 48 v
XCD Series
XCD Series
- OEM controller and Control Board
- for EDGE, EDGE-4X and HR motors
- small, compact board
- configurations for high (HR motors) and low voltages (EDGE motors)
- programable via IIC
Drivers and Controllers
You want to learn more about Motion Control/Motion Systems?
Contact us via contact(at)piezojena.com, use the contact form below or call +49 3641 66880.
